MIRTH TILES SPEC SHEET

MADE IN THE USA

  • Real Oak Hardwood Wear layer (top and bottom)     
  • Recycled Poplar Core
  • Emits No VOC’s
  • Tongue and Groove system

TECHNICAL INFORMATION

  • Thickness: ½” (12.7mm) overall thickness, 1/10” (2.3mm) Red Oak wear layer
  • Lower Substrate: 1/3” (8.1mm) Poplar 5 –ply real wood cross-grain, 1/10” (2.3mm) Oak bottom balancing layer
  • Width Offered: 12” (305mm) x 12” (305”)
  • Quantity/Box: 14 SF   
  • Quantity/Pallet: 36 Boxes, 972.32 lbs, 504 SF
  • Weight: 1.83 per SF

INDUSTRIAL FINISH

  • Prefinished
  • Satin, UV Urethane Tuff Coat
  • UV Cured, Emits No VOC
  • Cold check – Pass (details available)
  • Adhesion Test – Pass (details available)
  • Dry Film thickness: 6.6 Dry Mil Avg
  • Tabor Test:  393 Cycles (CS-17 with 500 Gram Weights)
  • Sheen: Average, 48
  • Slip Resistance: 0.45 Pass (Details available)
  • For Interior Use Only

WEAR WARRANTY

  • 5 Year Commercial
  • 15 Year Residential
  • Lifetime Structural

MAINTENANCE

  • Vacuum or damp mop (Mild detergent – Oil/Wax Soaps should not be used)
  • ·      UV Compatible Waterborne finish can be applied  (Details available)

PLEASE NOTE:

When ordering Mirth Tiles, please keep in mind that because wood is a natural product no two will be exactly alike. We think this adds to the beauty of the floors and gives them character not found in other types of manufactured tiles. Sometimes the variation is more obvious and for this reason we recommend ordering a 5% overage in case some of the tiles do not meet with your approval. 

The tiles are designed to be installed with cross grains and due to the tongue and groove construction, this cannot be changed. Depending on the color of the tile it may be more obvious than others. Lighter color tiles show more grain than the darker colors.